 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
| SHEET MATERIALS - m & y values |
| Material | Thickness | m | y | y |
| (mm) | FACTOR | lbf/in2 | MPa |
| Novus 10 5G | 0.75 | 2.00 | 2175 | 15.0 |
1.50 |
2.75 | 3625 | 25.0 | |
| 3.00 | 3.50 | 4350 | 30.0 |
| Novus 20 | 0.75 | 2.00 | 2175 | 15.0 |
1.50 |
2.75 | 3625 | 25.0 | |
| 3.00 | 3.50 | 4350 | 30.0 |
| Novus 21 | 0.75 | 2.00 | 2175 | 15.0 |
1.50 |
2.75 | 3625 | 25.0 | |
| 3.00 | 3.50 | 4350 | 30.0 |
| Novus 30 5G | 0.75 | 2.00 | 2175 | 15.0 |
1.50 |
2.75 | 3625 | 25.0 | |
| 3.00 | 3.50 | 4350 | 30.0 |
| Novus 34 5G | 0.75 | 2.00 | 2175 | 15.0 |
1.50 |
2.75 | 3625 | 25.0 | |
| 3.00 | 3.50 | 4350 | 30.0 |
| Novus 45 5G | 0.75 | 2.00 | 2000 | 13.8 |
1.50 |
2.50 | 3500 | 24.1 | |
| 3.00 | 3.00 | 4100 | 28.3 |
Novus 49 5G |
0.75 | 2.00 | 2000 | 13.8 |
1.50 |
2.50 | 3500 | 24.1 | |
| 3.00 | 3.00 | 4100 | 28.3 |
| Uniflon 50 | 1.00 | 2.80 | 1500 | 10.3 |
1.50 |
3.00 | 1600 | 11.0 | |
| 3.00 | 3.80 | 2500 | 17.2 |
| Uniflon 51 | 1.00 | 3.00 | 2150 | 14.8 |
1.50 |
3.50 | 2450 | 16.9 | |
| 3.00 | 4.00 | 2750 | 19.7 |
| Uniflon 53 | 1.00 | 3.00 | 2100 | 14.5 |
1.50 |
3.50 | 2450 | 16.9 | |
| 3.00 | 4.00 | 2850 | 19.7 |
| Novus Tl | All | 2.50 | 3000 | 20.6 |
| Novus Fl | All | 2.00 | 1500 | 10.3 |
| Sigraflex | All | 2.50 | 4000 | 27.6 |
| HiTemp | 1.50 | 3.00 | 3625 | 25.0 |
3.00 |
3.50 | 4350 | 30.0 |
Metallic Gaskets -m & y values |
Material
|
Filler Material
|
m | y | y |
| FACTOR | lbf/in2 | Mpa |
| Spiral Wound Gasket | Any
|
3.00 | 10000 | 68.9 |
| Camprofile | Graphite & PTFE
|
3.00 | 2500 | 17.2 |
Hi-Temp |
3.00 | 4350 | 30.0 | |
Novus
34
|
3.00 | 5800 | 40.0 |
| Elastagraph | Graphite & PTFE
|
3.00 | 3000 | 20.7 |
| Flat Metal Jacketed with Filler | Soft
Aluminium
|
3.25 | 5500 | 37.9 |
Soft Copper/Brass |
3.50 | 6500 | 44.8 | |
Iron/Soft
Steel
|
3.75 | 7600 | 52.4 | |
Monel
|
3.50 |
8000 | 55.2 | |
4%-6%
chrome
|
3.75 | 9000 | 62.1 | |
Stainless
Steel/Nickel-based alloys
|
3.75 | 9000 | 62.1 |
| Ring Joint | Iron/Soft
Steel
|
5.50 | 18000 | 124.1 |
Monel/4%-6%
chrome
|
6.00 | 21800 | 150.3 | |
Stainless
Steel/Nickel-based alloys
|
6.50 | 26000 | 179.3
|
 |
| Throughout the site all references to Novus Sealing, 5G, Graftec, Uniflon, Novatex are registered trademarks of Novus Sealing Ltd ( UK) and are protected under law worldwide. |
 |
|||||||||
ASME VIII m & y values |
|||||||||
In order to ensure the optimum
service life of our gasket materials it is important to not only
choose the correct material for the application but to install and
maintain it correctly. The following guidelines are designed to assist
the end user in the assembly of our gasket materials. |
|||||||||
|
|||||||||
|
||
|
|
| DOWNLOADS |
 |
| All our product literature and specification data sheets. |
|
| JOIN OUR MAILING LIST |
 |
|
|
|
IN THIS SECTION
|
|
|||||||
|
|||||||
|
|
 |
|
 |