 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
| Throughout the site all references to Novus Sealing, 5G, Graftec, Uniflon, Novatex are registered trademarks of Novus Sealing Ltd ( UK) and are protected under law worldwide. |
 |
|||||||||
 |
|||||||||
Novus Sealing are pleased to
announce the addition of GRAFOIL® GTS® Thread Sealant to
their portfolio of gasket and sealing products.
|
|||||||||
The GRAFOIL® product consists
of a high purity paste made from a combination of nuclear grade graphite
and a nuclear quality petroleum-based carrier. It has the inherent
characteristics needed for long life performance, even under the
most severe conditions.
|
|||||||||
Because of its resistance to
heat and corrosion, GRAFOIL® GTS® Thread Sealant paste provides
an effective seal for long periods of time, and will outperform conventional
thread sealants in high temperature applications.
|
|||||||||
| Features and Benefits | |||||||||
|
|||||||||
| Availability | |||||||||
| Each lot of GRAFOIL® GTS Thread Sealant is packaged in 125gm nuclear grade polyethylene ‘squeezable tubes’ to protect against contamination. | |||||||||
|
|||||||||
 |
|||||||||
 |
||
 |
||
Leaks in pressurised, fluid sealing applications can have catastrophic effects and can often be traced back to a simple bolt or stud failure. |
||
THE LOAD CONTROL SYSTEM - LC1 - PROVIDES A RELIABLE AND SAFE SOLUTION TO THIS PROBLEM |
||
The LC1 combines a high quality fastener and an accurate tension controller in a single integral unit. Fitted to the end of the stud fastener is a rotor that turns freely when the stud is loose, but locks when it is tight.
|
||
| This means that by simply checking whether the rotor will spin, you can instantly identify whether the stud is still tight – a process which up until now was difficult and time consuming. Its ingenious corrosion-resistant design allows for consistently high performance in the most extreme of environments and even features an integral tension gauge, which measures stud strain with an accuracy of +/-5%. |
||
| For more information please contact our Applications Engineering Team or download the brochure by clicking the link below. | ||
|
|
||
 |
||
Novus Sealing the worldwide
reputed manufacturer of gaskets, seals, jointing and modified PTFE
material now supplement its product portfolio with a bolting range
including stud bolts, threaded bar and fasteners. |
||
Our bolting range is manufactured
to national and international standards together with specific customer
designs. |
||
Typically supplying the requirements
of Oil, Gas, Offshore Power Generation, Shipping, Building, Instrumentation
and General Industries, Novus are once again leading the way - responding
to market demand in offering complete sealing solutions - the one
stop sealing shop. |
||
|
 |
||
 |
||
Novus Bolt-Lube
is a high quality assembly and anti-sieze compound, designed for
use on fasteners operating where arduous conditions may be encountered.
|
||
Novus Bolt-Lube has
been formulated to provide easier assembly/disassembly of fasteners,
reducing the torque required to load and unload the joint and an
extreme pressure additive provides additional protection against
galling or
seizure. |
||
Novus Bolt-Lube contains molybdenum
disulphide(MoS2), graphite and other low friction ingredients in
a non-setting form and is available in a range of sizes, from 500g
tin
to 20kg pail. |
||
|
|
||
|
|
| DOWNLOADS |
 |
| All our product literature and specification data sheets. |
|
| JOIN OUR MAILING LIST |
 |
|
|
|
PRODUCTS & SERVICES
|
|
|||||||
|
|||||||
|
|
 |
|
 |